Training programs are designed in consultation with Industry Experts to impart domain specific know how through practical and project oriented training. Training also includes 3 months hands-on experience on Design Projects, on completion of which, candidates would be eligible to get 3 months experience certificate from CADCAMGURU.
Each student will get the experience of working on software like Pro/ENGINEER, CATIA etc.
Unique Features
1. 3 months hands-on experience on Design Projects with experience Certificate from CADCAMGURU
2. Training on 3D CAD modeling of castings, forgings, plastic, sheet metal and machined components.
3. Training workshops in soft skills.
4. Aptitude test training for selection.
Course Details
Duration
6 months (full time)
Eligibility
a) B.E. Mechanical / Production / Automobile passed out or equivalent.
b) The student who have appeared for final year exam can also apply.
c) Diploma in Mechanical / Production / Automobile streams
d) Industry sponsored candidates.
Selection Criteria
Selection will be based on aptitude test and the personal interview.
Aptitude Test
Walk - in Aptitude Test schedule for CADCAMGURU Certified Design Engineer will be conducted in between 25th Feb 2010 to 24th March 2010.
- Maximum exam. duration is 2 Hours.
- Rough work is to be done on the rough sheet provided.
- All questions carry equal marks.
- No Negative Marking.
- Use of Calculators is allowed.
- Put off Mobile.
Entrance Exam: Candidates will have to appear for an objective type aptitude test between 25 feb 2010 to 24th March 2010 at following center:
CADCAMGURU INSTITUTE, Dhondumama Sathe Homeopathic Medical College Premises, Near Garware College,
Off Karve Road,Pune - 411 004.
Time : 10:00 am to 6:00 pm (Mon. to Sat.)
Interview:
The candidates who have been short listed in the aptitude test will have to appear for an interview.
The Selected candidates will have to produce the Original documents for verifications.
All Interviews on - 9th August 2009 , Sunday.
Time : 1 pm to 6 pm
Confirmation of Admission:
The selected candidates will have to confirm their admission by paying Rs.10000/- towards the first installment of course fees.
This installment is non-refundable.
Commencement of Course : The course will start on - 7th September 2009.
Workshops -
1. Communication skills.
2. Presentation skills.
3. Group discussions.
4. Interview techniques.
5. Career guidance.
Using leading CAD softwares like
Pro|Engineer Wildfire 4.0 and CATIA V5 R19
Solid and surface modeling techniques
for creating 3D models for
1. Machined components
2. Sheet metal components
3. Plastic components
4. Castings
5. Forgings
Work with neutral CAD data
Create library of reusable components
Customize software toolbars for better usability
Assembly –
1. Constraining
2. Car - coordinates systems
3. Top - down assembly design
4. Manage large assemblies
Transfer CAD data between different CAD Softwares
Drafting and detailing with G D & T
Introduction to FEA
Project-
3 months Live CAD Project
Final Assessment and Examination
Each candidate will be assessed on the basis of:
1. Technical Interview
2. CAD Practical & theorotical test
3. Project Work
4. Seminars
5. Group Discussions
6. Aptitude Test
Course Certification
The successful candidates will receive Certificate of Passing from CADCAMGURU Solutions Pvt. Ltd.
Rs.40,000/- per candidate. (Rupees- Forty Thousand only) + taxes Applicable (Total Amt : Rs. 44,120/-)
The fees are non-refundable.
To be paid by cash or D.D. drawn in favour of CADCAMGURU Solutions Pvt. Ltd. payable at Pune.
Fees are to be paid in two installments:
1.
First installment of Rs. 10,000/- to be paid at the time of confirmation of admission.
2.
Second installment of Rs. 34,120/- is to be paid on or before 24th March 2010.
